Operation Manual

Assigning a camera to a monitor
Main window > > tab
You can assign IP devices to a decoder. This displays the video signal on the analog monitor
and plays the audio signal on the speakers if connected to the decoder. DiBos and Bosch
Allegiant cameras cannot be assigned this way.
To assign a camera image to a monitor:
1. Click the tab and the tab.
2. Drag a camera from the Logical Tree window to the desired monitor.
Using audio mode
Main window
If available you can activate audio for a selected camera.
To hear the audio signal of multiple cameras simultaneously, activate multichannel audio
mode.
You switch the audio mode in the Options dialog box (Extras menu, Options... command).
To activate / de-activate audio:
1. Select an Image pane.
2. Click
to de-activate or to activate audio.
Displaying metadata (for NVR recordings only)
Main window >
You can display metadata of the selected camera such as ATM / POS / Barcode if available.
To display metadata in a separate window:
1. Select an Image pane.
2. In the Camera menu, click Show Metadata....
A window is displayed with the available metadata.
When you close the selected Image pane, the Metadata window is closed too.
Using the Intercom functionality
Main window >
You can use the Intercom functionality only when Live Mode is active.
Ensure that the microphone is active on your sound card and its volume is not 0. You perform
this task in the Control Panel of your workstation computer. Additionally ensure that in the
recording control of your sound card only the microphone is selected, not the stereo mix. For
Windows 7: Disable all input devices except the one you want to use for Intercom
functionality.
6.19
6.20
6.21
6.22
32 en | Displaying camera images Bosch Video Management System
2013.07 | V1 | Operator Client Operator's Manual Bosch Sicherheitssysteme GmbH