Operation Manual

– UTC–x: time zone of each available Management Server
The time based on the selected time zone is displayed in the menu bar:
Using the Timeline
You can access a specific time in the Timeline via the Hairline.
To navigate in the Timeline:
4 Click somewhere in the Timeline.
The images of the selected point in time are displayed in the Image window.
Or:
1. In the date and time field, enter the required values.
2. Click
.
The Hairline jumps to this time. The images of the entered point in time are displayed in
the Image window. Use a Timeline control for the required playing option.
You can select a time period in the Timeline using the Hairline. You can use this selection for
further tasks such as for exporting video data.
4 Drag the bottom handles of the Hairline to select a time period or to change this
selection.
Drag the upper handles to move the hairline or selection.
Playing a specific recording mode
Main window >
> tab
You can play specific recordings like alarm or video loss recording.
To play a specific recording mode:
4 In the list of recording modes, select the required one.
The Hairline jumps to this time. The images of the entered point in time are displayed in
the Image window.
Click
to jump to the previous change of the recording mode, or click to jump
to the next change of the recording mode.
Playing recorded videos
Note:
Bosch Allegiant cameras are not recorded within Bosch VMS.
To play recorded videos:
1. Assign a camera to an Image pane.
2. Use a Timeline control for the required playing option.
9.2
9.3
9.4
Bosch Video Management System Managing recorded videos | en 43
Bosch Sicherheitssysteme GmbH Operator's Manual 2013.07 | V1 | Operator Client