Operation Manual

To add a comment to an alarm:
1. Click
.
The Workflow dialog box is displayed for entering a comment and displaying the action
plan for this alarm. If no action plan is assigned to the alarm, the dialog box only displays
the Comment: field.
2. In the Comment: field, type your comment.
3. Click Close.
4. Clear the alarm.
The comment is added as a separate entry in the Logbook and added to the alarm entry
in the Logbook.
Clearing an alarm
Main window >
> tab
or
Main window >
> tab
To clear an alarm:
4 Select the desired alarm entries and click .
If the alarm has the Comment or Force Workflow attribute, you cannot clear the alarm
directly. In these cases you must first display the action plan and enter a comment.
The alarm is cleared and removed from your Alarm List.
If no other alarms are currently being displayed, the Alarm Image window is closed and
the Image pane is displayed.
Customizing the Alarm List window
Main window >
> tab
or
Main window >
> tab
To sort the table:
1. Click a column heading.
The arrow in the column heading indicates whether the table is sorted in ascending or
descending order.
2. To change the sorting order, click the column heading again.
To add or remove columns:
4 Right-click the column heading and click a marked entry to remove the corresponding
column or click an unmarked entry to add the corresponding column.
10.3
10.4
Bosch Video Management System Handling alarms | en 51
Bosch Sicherheitssysteme GmbH Operator's Manual 2013.07 | V1 | Operator Client