Operation Manual

3 Function keys Allow you to control certain functions directly.
Prod: Starts a scan process to find the connected
workstation. If scanning is successful: In the
softkey display, Terminal and Keyboard Control
menus are displayed. For selecting Bosch VMS,
press the Terminal softkey.
Mon: Allows you to enter a monitor number
(digital or analog monitor).
Clr: Clears any numeric entry or has a Back-
function.
: Currently not supported.
Shot: Allows you to select a camera pre-position
or to leave Selection mode.
4
Numeric keypad with ENTER key Allows you to enter logical numbers. The number
is displayed in the status display.
Unless preceded by pressing the Mon or Shot
key, a numeric entry is interpreted as a logical
camera number. The camera with the entered
number is displayed in an Image pane or an
analog monitor.
Status display
The status display changes dynamically to display information about the keyboard’s present
mode of operation.
The following illustration shows the various elements of the status display:
MON CAM
A0
D1
PTZ
11
1
7
6
4
2
DSrv Srv1 1
3
34
5
1 Monitor Displays the selected analog monitor or Image pane
number.
2 Camera Displays the selected camera number.
3 Server Displays the server number of the Management Server
where the currently selected camera is configured.
11.2.1
Bosch Video Management System Using a CCTV keyboard | en 57
Bosch Sicherheitssysteme GmbH Operator's Manual 2013.07 | V1 | Operator Client