Operation Manual

– Tilt up / down when video is playing: Set the playback speed.

– Tilt right / left: Pause and step forward / backward.

In Jogshuttle Mode, the Focus and Iris buttons allow you to use the following feature:

– Press Focus or Iris to move the hairline in the Timeline forward or backward. Focus

moves the hairline for a larger amount of time forward or backward, Iris moves the

hairline for a smaller amount of time forward or backward.

– To lock the system in the current playback speed, press the Shot button while twisting

the joystick.

Using softkeys

The following operation modes are available:

– Tree Mode

You use this operation mode to control devices that are available in the Logical Tree of

the Operator Client.

– Command Mode

You use this operation mode to send commands like switch to Playback Mode.

To toggle between Tree Mode and Command Mode:

1. In the Tree Mode: Press the left Level Up softkey as often as needed to display the root

level and then press the Exit softkey to display the Command Mode.

2. In the Command Mode: Press the Tree Mode softkey.

To use the Logical Tree mode:

4 Switch to the Tree Mode.

Right side of the softkey display:

4 Press a softkey to control the item (e.g. display a camera or switch a relay).

When you press a map or a folder (black background), it moves to the left side. The right

side displays the its content.

Left side of the softkey display:

1. Press a softkey on the left side to select a folder or a map and to display its content on

the right side of the softkey display.

To display a map, press the softkey once to mark it (with a rectangle) and press the

softkey again to display it in the selected Image pane.

2. Press Level Up to enter the next upper level of the Logical Tree.

3. Press UP to move the selection upward or DOWN to move downward.

The following figures show an example of a Logical Tree and its representation on the softkey

display of the keyboard.

11.3.5

60 en | Using a CCTV keyboard Bosch Video Management System

2013.07 | V1 | Operator Client Operator's Manual Bosch Sicherheitssysteme GmbH