Operation Manual

Using a Bosch IntuiKey keyboard connected to a decoder
A keyboard connected to decoder gives you access to the Management Server without
Operator Client software. Hence, you must log on. Only the analog mode is available.
Starting the keyboard
After starting the keyboard you must log on to the Management Server.
Notice!
Only Bosch VMS users with number-only user names and number-only passwords can use the
analog mode of a Bosch IntuiKey keyboard.
The user must have access rights for the decoder connected to the Bosch IntuiKey keyboard.
To start the keyboard:
4 Press the Terminal softkey.
The following logon display is shown:
User #
BOSCH VMS
_ _ _
4 Enter the user name.
Password
BOSCH VMS
_ _ _ _ _ _
After successful logon, the Terminal and Keyboard Control softkeys are displayed in the
softkey display.
Displaying cameras
1. Press Mon, press the number of the desired monitor, and press ENTER.
Monitor numbers are configured in the Configuration Client.
2. Press the desired number of the camera and press ENTER.
The desired camera is displayed.
Example: Press Mon, 3, and ENTER. Then press 4 and ENTER. Camera 4 is displayed in
the 3rd analog monitor.
When the selected monitor displays a PTZ camera, the keyboard switches to PTZ mode
automatically.
Using the joystick
The joystick allows you to use the following features:
11.4
11.4.1
11.4.2
11.4.3
62 en | Using a CCTV keyboard Bosch Video Management System
2013.07 | V1 | Operator Client Operator's Manual Bosch Sicherheitssysteme GmbH