Operation Manual
– Twist the joystick to zoom in and out.
– Tilt the joystick to pan and tilt a PTZ camera.
– Use Focus and Iris buttons for a PTZ camera.
Using softkeys
The following operation mode is available:
– Command Mode
To use the Command Mode:
4 Press a softkey to execute the desired command.
The following commands are available:
– Start /stop alarm recording
– Log off
11.4.4
Bosch Video Management System Using a CCTV keyboard | en 63
Bosch Sicherheitssysteme GmbH Operator's Manual 2013.07 | V1 | Operator Client