Operation Manual

8 Alarm priority Displays the priority value that was configured in
the Configuration Client for the automatic display
behavior.
9 Time Displays the time when the alarm was triggered.
10 Alarm Sequence buttons Click to display the previous or next Alarm Image
pane.
11 Number of alarms Displays the number of the currently displayed
alarm and the number of all alarms.
12
Alarm List window
Displays all alarms the system generates.
Allows you to accept or clear an alarm or to start a
workflow, for example, by sending an E-mail to a
maintenance person.
The Alarm List is not being displayed, when the
connection to the Management Server is lost.
13 Event type Indicates the type of event that triggered the alarm.
14
Monitors window (only
available if at least one analog
monitor group has been
configured)
Displays the configured analog monitor groups.
Allows you to switch to the next or previous analog
monitor group if available.
Note:
The Monitors tab is not visible if your
Operator Client is connected to more than one
Management Server.
PTZ Control window
Allows you to control a PTZ camera.
15
Logical Tree window
Displays the devices your user group has access to.
Allows you to select a device for assigning it to an
Image pane.
Favorites Tree window
Allows you to organize the devices of the Logical
Tree as required.
Bookmarks window
Allows you to manage bookmarks.
Map window
Displays a site map. Allows you to drag the map to
display a particular section of the map.
If activated, a map is displayed automatically for
each camera displayed in an Image pane. In this
case, the camera must be configured on a map.
Detailed information:
– Menu commands, page 74
– Logical Tree window, page 80
– Favorites Tree window, page 81
– Map window, page 85
Bosch Video Management System
User interface | en 73
Bosch Sicherheitssysteme GmbH Operator's Manual 2013.07 | V1 | Operator Client