Operation Manual

An Image pane that is connected to a camera displays the name of the camera, IP address and
encoder input number, server number and the camera number in a tooltip.
A brown frame around a camera Image pane indicates a static camera image.
A green frame around a camera Image pane indicates a sequence running in this Image pane.
An empty Image pane is displayed with blue color.
Status information on the connection to the monitor wall hardware is displayed in the status
line in the lower boundary of the monitor wall Image window.
A connection loss between monitor wall and a camera is displayed with
.
See also
– Controlling a monitor wall, page 34
PTZ Control window
Main window >
> PTZ Control tab
The PTZ Control window becomes active when a PTZ camera or a swiveling/tilting camera is
displayed in the selected Image pane.
Allows you to control a camera with the corresponding functions displayed in the selected
Image pane.
Click to zoom in or out digitally. These controls are active even
when a non-PTZ camera is selected.
Click an arrow or drag the joystick in the center to swivel the
camera in all directions.
Click to zoom in the picture angle (zoom angle) / zooming out the picture
angle (wide angle).
Click to set the focus near / focus far.
12.26
86 en | User interface Bosch Video Management System
2013.07 | V1 | Operator Client Operator's Manual Bosch Sicherheitssysteme GmbH