Interactive User Manual
Table Of Contents
- Oven
- en-us
- Table of contents
- 1 IMPORTANT SAFETY INSTRUCTIONS
- 2 Preventing material damage
- 3 Environmental protection and energy-saving
- 4 Familiarizing yourself with your appliance
- 5 Accessories
- 6 Before using for the first time
- 7 Basic Operation
- 7.1 Setting the heating mode and temperature - 500 Series double ovens
- 7.2 Setting the heating mode and temperature - 500 Series single ovens
- 7.3 Setting the heating mode and temperature - 800 and Benchmark® Series
- 7.4 Temperature range by heating mode
- 7.5 Heating time limitation
- 7.6 Fast preheat
- 7.7 Meat probe
- 7.8 Turning the panel lock on or off
- 8 Timer functions
- 9 Basic settings
- 10 Home Connect™
- 11 Getting the most out of your appliance
- 11.1 Rack positions
- 11.2 Getting the best results
- 11.3 General tips for heating modes
- 11.3.1 How to use Bake mode
- 11.3.2 How to use Conv Bake mode
- 11.3.3 How to use Conv Multi Rack mode
- 11.3.4 How to use Pizza mode
- 11.3.5 How to use Roast mode
- 11.3.6 How to use Conv Roast mode
- 11.3.7 How to use Broil (high/low) mode
- 11.3.8 How to use Conv Broil mode
- 11.3.9 How to use Frozen Foods mode
- 11.3.10 How to use Air Fry mode
- 11.3.11 How to use Proof mode
- 11.3.12 How to use Warm mode
- 11.3.13 How to use EcoChef™ mode
- 12 Cleaning and maintenance
- 13 Troubleshooting
- 14 Cooking charts
- 15 Disposal
- 16 Customer Service
- 17 STATEMENT OF LIMITED PRODUCT WARRANTY
- fr-ca
- Table des matières
- 1 IMPORTANTES CONSIGNES DE SÉCURITÉ
- 1.1 Définitions des termes de sécurité
- 1.2 Informations générales
- 1.3 Utilisation prévue
- 1.4 Restriction sur le groupe d'utilisateurs
- 1.5 Utilisation sécuritaire
- 1.6 Sécurité des enfants
- 1.7 Fonction de nettoyage
- 1.8 Installation et entretien appropriés
- 1.9 Fonctionnement à distance
- 1.10 Mises en garde conformément à la proposition 65 de l'État de Californie
- 2 Prévenir les bris matériels
- 3 Protection de l'environnement et économies
- 4 Description de l'appareil
- 5 Accessoires
- 6 Avant d'utiliser pour la première fois
- 7 Opération de base
- 7.1 Réglage du mode de chauffage et de la température - fours doubles série 500
- 7.2 Réglage du mode de chauffage et de la température - fours simples série 500
- 7.3 Réglage du mode de chauffage et de la température - 800 et Benchmark™ série
- 7.4 Plage de température par mode de chauffage
- 7.5 Limitation du temps de chauffage
- 7.6 Préchauffage rapide
- 7.7 Sonde thermométrique
- 7.8 Activer ou désactiver le verrouillage du panneau
- 8 Fonctions de minuterie
- 8.1 Minuterie de cuisine
- 8.2 Minuterie du four
- 8.3 Cuisson différée
- 8.4 Mode sabbat
- 9 Réglages de base
- 10 Home Connect™
- 11 Tirer le meilleur parti de l’électroménager
- 11.1 Positions des grilles
- 11.2 Obtenir les meilleurs résultats
- 11.3 Conseils généraux pour les modes de chauffage
- 11.3.1 Comment utiliser le mode Bake
- 11.3.2 Comment utiliser le mode Conv Bake
- 11.3.3 Comment utiliser le mode Conv Multi Rack
- 11.3.4 Comment utiliser le mode Pizza
- 11.3.5 Comment utiliser le mode Roast
- 11.3.6 Comment utiliser le mode Conv Roast
- 11.3.7 Comment utiliser le mode Broil (high/low)
- 11.3.8 Comment utiliser le mode Conv Broil
- 11.3.9 Comment utiliser le mode Frozen Foods
- 11.3.10 Comment utiliser le mode Air Fry
- 11.3.11 Comment utiliser le mode Proof
- 11.3.12 Comment utiliser le mode Warm
- 11.3.13 Comment utiliser le mode EcoChef™
- 12 Nettoyage et entretien
- 12.1 Produits de nettoyage
- 12.2 Fonction autonettoyante
- 12.3 Entretien
- 13 Dépannage
- 14 Tableaux de cuisson
- 15 Élimination
- 16 Service à la clientèle
- 17 ÉNONCÉ DE LA GARANTIE LIMITÉE DU PRODUIT
en-us Getting the most out of your appliance
26
10.4 Setting remote control
You can use the Home Connect app to easily access the
functions of your oven.
Note
¡ Operating the appliance directly from the oven always
has priority. During this time, it is not possible to operate
the oven using the HomeConnect™ app.
¡ The remote control is already activated when you con-
nect your oven
¡ If the remote control has been deactivated, only the
oven's operating statuses will be displayed in the
HomeConnect™ app.
¡ The remote control is automatically activated when the
remote start is activated.
1. Press Settings to cycle through available options until
"HOME CONNECT SETTINGS" is displayed.
2. Press Enter.
a "PRESS ENTER FOR HC" is displayed.
3. Press Settings to cycle through available options until
"REMOTE CTRL DISABLED" or "REMOTE CTRL EN-
ABLED" is displayed.
4. Press Enter.
a "PRESS 1 REMOTE CTRL ON" or "PRESS 0 REMOTE
CTRL OFF" is displayed.
5. Press 1 or 0 to switch remote control on or off.
10.5 Remote diagnostics
The Customer Service can access your appliance via Re-
mote Diagnostics if you ask them to do so, if your appli-
ance is connected to the HomeConnect™ server and if
Remote Diagnostics is available in the country where you
are using the appliance.
Tip:Further information and details about the availability
of Remote Diagnostics in your country can be found in the
Service/Support section of your local website: www.home-
connect.com
10.6 Software update
The oven checks at regular intervals whether updates are
available for the HomeConnect™ software.
To do this, you need to be a registered HomeConnect™
user, have installed the app on your mobile device and be
connected to the HomeConnect™ server.
As soon as a software update is available, you will be in-
formed by the HomeConnect™ app, from which you will
also be able to download the update. Once the update has
been successfully downloaded, you can start installing it
via the basic settings of your oven, or the HomeCon-
nect™ app if you are on your local area network. The
HomeConnect™ app will notify you once installation is
complete.
Notes
¡ You can continue to use your oven as usual while up-
dates are downloading.
¡ Depending on your personal settings in the app, soft-
ware updates can also be set to download automati-
cally.
¡ We recommend that you install security updates as
soon as possible.
10.7 Data Protection
Please see the information on data protection.
The first time your appliance is registered on a home
network connected to the Internet, your appliance will
transmit the following types of data to the
HomeConnect™ server (initial registration):
¡ Unique appliance identification (consisting of appliance
codes as well as the MAC address of the installed Wi-Fi
communication module).
¡ Security certificate of the Wi-Fi communication module
(to ensure a secure data connection).
¡ The current software and hardware version of your ap-
pliance.
¡ Status of any previous reset to factory settings.
This initial registration prepares the HomeConnect™
functions for use and is only required when you want to
use the HomeConnect™ functions for the first time.
Note:Please note that the HomeConnect™ functions can
be utilized only with the HomeConnect™ app. Information
on data protection can be called up in the HomeCon-
nect™ app.
Getting the most out of your appliance
11 Getting the most out of your appli-
ance
Getting the most out of your appliance
Here, you can find tips on how best to use the heating
modes and accessories of your oven. You can also find
recommended settings for various dishes as well as the
best accessories and cookware.
Download the HomeConnect™ app to access cooking
tips and tricks, as well as get cooking inspiration.
11.1 Rack positions
Your oven has six rack positions. The rack positions are
counted from bottom to top.
Use rack positions 1 through 6 only. DO NOT attempt to
use the top guide to support an oven rack.
Rack po-
sition
Best for
6 Broiling hamburgers and 1" (2.5cm) steaks
1
These marks are registered trademarks of their respec-
tive owners. All other trademarks are trademarks of
BSH Home Appliances Corporation or its affiliated
companies.