Installation instructions

Page 12
Attaching flue duct
Hidden surfaces may have sharp edges. Use caution
when reaching behind or under appliance.
1. Remove the protective foil from both ue ducts.
2. Push one ue duct into the other.
Notes
• To prevent scratches, lay paper over the edges of
the lower ue duct to protect the surface.
• For ducted operation, turn the upper ue duct so
that the ventilation slots point downward.
3. Remove the protective foil from the extractor hood.
4. Place ue ducts on the appliance.
5. Push the inner ue duct upwards and attach it to the
angle brackets on the left and right.
6. Screw the ue duct to the sides of the angle bracket
using two screws.
AB
A Installation pipe
B Power connection
C Cable connector listed in UL
7. Fasten the lower part of the ue duct using two
screws.
8. Remove the protective paper from the lower ue duct.
9. Install metal-mesh grease lter.
Removing the appliance
1. Remove the metal-mesh grease lter.
2. Loosen the ue duct.
3. Disconnect the appliance from the power supply.
4. Loosen the exhaust air lines.
5. Loosen screws for fastening the appliance.
6. Remove the appliance.