Operation Manual
Table Of Contents
- Title Page
- Table of Contents
- Safety
- Unpacking
- Product Description
- Electrical Connections
- Install the MIC (standard) PSU
- MIC PSU Overview
- About the MIC Shielded Composite Cable
- Composite Cable Color-coding
- Earth Link on PCB
- Fuse Ratings
- Alarm Inputs
- Layout of MIC Power Supply Units (PSUs)
- Installation Warnings and Prerequisites
- Installation Instructions (Power Supply)
- Commissioning the Camera with Heater Option Fitted
- Simultaneous IP and Analog Video/Control ("Hybrid" Operation)
- Fit the Sunshield (MIC612)
- Getting Started
- Controlling the Camera
- On-Screen Display (OSD) Menus (Bosch Protocol)
- On-Screen Display (OSD) Menus (Pelco Protocol)
- Operation of the Thermal Camera
- Common User Commands
- Advanced Features
- Maintenance and Troubleshooting
- Technical data
- Appendices
- Back Page
Figure 5.4: Layout of MIC-240PSU-2 and MIC-115PSU-2
No. PCB
Marking
Description/Function of
Connection / Terminal
Type of Connection/
Terminal
1 HD1 AC Power input connector
Live (HD1-1); Neutral (HD1-2)
[Ground wire connects to earth termination post
Screw terminal
2 HD3 Shielded composite cable header (connections to camera) Screw terminal
3 HD5 RS-485 control header Screw terminal
4 HD4 Telemetry header Molex connector
5 HD8 USB to RS-485 converter
[Not used for MIC440.]
Molex connector
6 HD6 [Optional] Auxiliary, heater
[Not used for MIC440.]
Screw terminal
7 HD7 Video (composite cable) Screw terminal
8 HD2 Tamper switch header Screw terminal
9 CN3
Video Switched
Coax connection (Switched visible/thermal video out)
[Not used for MIC440.]
BNC socket
10 CN1
Video Out
Coax connection header
(Visible video out)
BNC socket
11 CN2 Auxiliary / add-on card terminal Plug in
12 Earth Link Earth Link
18 en | Install the MIC (standard) PSU MIC612 Thermal Camera
2016.03 | 2.2 | F.01U.249.416 Operation Manual Bosch Security Systems