Operation Manual
Table Of Contents
- Title Page
- Table of Contents
- Safety
- Unpacking
- Product Description
- Electrical Connections
- Install the MIC (standard) PSU
- MIC PSU Overview
- About the MIC Shielded Composite Cable
- Composite Cable Color-coding
- Earth Link on PCB
- Fuse Ratings
- Alarm Inputs
- Layout of MIC Power Supply Units (PSUs)
- Installation Warnings and Prerequisites
- Installation Instructions (Power Supply)
- Commissioning the Camera with Heater Option Fitted
- Simultaneous IP and Analog Video/Control ("Hybrid" Operation)
- Fit the Sunshield (MIC612)
- Getting Started
- Controlling the Camera
- On-Screen Display (OSD) Menus (Bosch Protocol)
- On-Screen Display (OSD) Menus (Pelco Protocol)
- Operation of the Thermal Camera
- Common User Commands
- Advanced Features
- Maintenance and Troubleshooting
- Technical data
- Appendices
- Back Page
Table of contents
1
Safety 5
1.1 About this Manual 5
1.2 Legal Information 5
1.3 Safety Precautions 5
1.4 Important Safety Instructions 5
1.5 Customer Support and Service 7
2
Unpacking 8
2.1 Parts List 8
2.2 Additional Products Required 8
2.3 Additional Tools Required 9
3
Product Description 10
4
Electrical Connections 11
4.1 About the MIC Shielded Composite Cable 11
4.2 Composite Cable Color-coding 12
5
Install the MIC (standard) PSU 14
5.1 MIC PSU Overview 14
5.2 About the MIC Shielded Composite Cable 14
5.3 Composite Cable Color-coding 15
5.4 Earth Link on PCB 16
5.5 Fuse Ratings 17
5.6 Alarm Inputs 17
5.7 Layout of MIC Power Supply Units (PSUs) 17
5.8 Installation Warnings and Prerequisites 19
5.9 Installation Instructions (Power Supply) 20
5.10 Commissioning the Camera with Heater Option Fitted 28
5.11 Simultaneous IP and Analog Video/Control ("Hybrid" Operation) 30
6
Fit the Sunshield (MIC612) 31
7
Getting Started 33
7.1 Establishing Control of the Camera 33
7.1.1 Establishing Control of the Camera via Biphase Protocol 33
7.1.2 Establishing Control of the Camera via RS-485 Protocol 33
7.2 Powering On 34
7.3 About Setting the Camera Address via FastAddress 34
7.4 Setting the Addresses of the Two Cameras of the MIC612 35
7.5 FastAddress, Bosch Protocol 35
7.6 FastAddress, Pelco Protocols 36
7.7 Active Commands in FastAddress 37
7.8 Setting Passwords 37
7.8.1 Special Passwords 37
7.8.2 Setting Passwords, Bosch Protocol 37
8
Controlling the Camera 38
8.1 Basic Keyboard Operation 38
8.2 Navigating the On-Screen Display (OSD) Menus 38
8.3 Keyboard Commands, Bosch Protocol 39
8.4 Keyboard Commands, Pelco Protocol 39
8.5 Special Preset Commands, Pelco Protocol 40
MIC612 Thermal Camera Table of Contents | en 3
Bosch Security Systems Operation Manual 2016.03 | 2.2 | F.01U.249.416