Operation Manual
Table Of Contents
- Title Page
- Table of Contents
- Safety
- Unpacking
- Product Description
- Electrical Connections
- Install the MIC (standard) PSU
- MIC PSU Overview
- About the MIC Shielded Composite Cable
- Composite Cable Color-coding
- Earth Link on PCB
- Fuse Ratings
- Alarm Inputs
- Layout of MIC Power Supply Units (PSUs)
- Installation Warnings and Prerequisites
- Installation Instructions (Power Supply)
- Commissioning the Camera with Heater Option Fitted
- Simultaneous IP and Analog Video/Control ("Hybrid" Operation)
- Fit the Sunshield (MIC612)
- Getting Started
- Controlling the Camera
- On-Screen Display (OSD) Menus (Bosch Protocol)
- On-Screen Display (OSD) Menus (Pelco Protocol)
- Operation of the Thermal Camera
- Common User Commands
- Advanced Features
- Maintenance and Troubleshooting
- Technical data
- Appendices
- Back Page
Sets the limit for sensitivity when the shutter speed is set to Auto SensUP. Options: 2x, 4x,
7.5x, 15x (default setting).
Night Mode
Selects night mode (B/W) to enhance lighting in low light scenes. Options: ON, OFF, AUTO
(default setting).
Night Mode Color
Determines if color processing remains in effect while in night mode. Options: ON, OFF
(default setting).
Night Mode Threshold
Adjusts the level of light at which the camera automatically switches out of night mode (B/W)
operation. Sliding scale: –(10 to 55)+, (in increments of 5) 10 is earlier, 55 is later. Default
setting: 55
Pre-Comp
Amplifies the video gain to compensate for long distance cable runs.
Sliding scale: –(1 to 10)+. Default setting: 1
Stabilization
Eliminates shaking of the camera in both the vertical and horizontal axes, resulting in
exceptional image clarity without reducing camera sensitivity or picture quality. Options: ON,
OFF (default setting).
Thermal Camera Setup Menu
The Thermal Camera Setup Menu contains settings that can be changed for the thermal
camera.
Thermal Camera Setup
Exit...
* Thermal Mode White Hot
* SPOT meter display OFF
* AGC Mode OUTDOOR
* Second Channel Video
Restore Defaults...
* = Factory Setting
Focus/Iris: Select
Thermal Mode
9.2
46 en | On-Screen Display (OSD) Menus (Bosch Protocol) MIC612 Thermal Camera
2016.03 | 2.2 | F.01U.249.416 Operation Manual Bosch Security Systems