Operation Manual
Table Of Contents
- Title Page
- Table of Contents
- Safety
- Unpacking
- Product Description
- Electrical Connections
- Install the MIC (standard) PSU
- MIC PSU Overview
- About the MIC Shielded Composite Cable
- Composite Cable Color-coding
- Earth Link on PCB
- Fuse Ratings
- Alarm Inputs
- Layout of MIC Power Supply Units (PSUs)
- Installation Warnings and Prerequisites
- Installation Instructions (Power Supply)
- Commissioning the Camera with Heater Option Fitted
- Simultaneous IP and Analog Video/Control ("Hybrid" Operation)
- Fit the Sunshield (MIC612)
- Getting Started
- Controlling the Camera
- On-Screen Display (OSD) Menus (Bosch Protocol)
- On-Screen Display (OSD) Menus (Pelco Protocol)
- Operation of the Thermal Camera
- Common User Commands
- Advanced Features
- Maintenance and Troubleshooting
- Technical data
- Appendices
- Back Page
Adjusts the display mode for the thermal camera. Options:
Option Description
White
Hot
(Default setting) Hot objects appear brighter than cold objects.
Black Hot Hot objects appear darker than cold objects.
Fusion Cold objects appear deep blue or purple or black; hot objects appear yellow.
Rainbow Cold objects appear black; hot objects appear red or yellow.
Globow Similar to Fusion, without blue or purple.
Ironbow
1
Similar to Fusion, with more red in the middle of the range.
Ironbow
2
Similar to Fusion, with more orange in the middle of the range.
Sepia Cold objects appear black; hot objects appear yellowish-green.
Color 1 Cold objects appear purple and black; hot objects appear red.
Color 2 Very similar to Ironbow 1.
Ice Fire Cold objects appear blue; hot objects appear red.
Rain Similar to Color 1, with more variations.
Red Hot Cold objects appear black; hot objects appear bright red.
Green
Hot
Cold objects appear black; hot objects appear bright green.
SPOT meter display
Controls the display of the spot meter, ON or OFF, and switches between degrees C and F.
The Spot Meter must be ON before either the Thermal Digital readout or Thermometer can be
displayed. Default setting: OFF
AGC Mode
Controls the Automatic Gain Control (AGC). Options:
Option
Description
Outdoor (Default setting) Image contrast and brightness are optimized automatically
as the outdoor scene varies.
Indoor Image contrast and brightness are optimized automatically as the indoor
scene varies.
Low
Contrast
Creates better contrast between two objects of different temperatures.
Second Channel Video
Switches the video channel between Thermal camera option and Visible (optical) camera
option.
MIC612 Thermal Camera
On-Screen Display (OSD) Menus (Bosch Protocol) | en 47
Bosch Security Systems Operation Manual 2016.03 | 2.2 | F.01U.249.416