Operation Manual
Table Of Contents
- Title Page
- Table of Contents
- Safety
- Unpacking
- Product Description
- Electrical Connections
- Install the MIC (standard) PSU
- MIC PSU Overview
- About the MIC Shielded Composite Cable
- Composite Cable Color-coding
- Earth Link on PCB
- Fuse Ratings
- Alarm Inputs
- Layout of MIC Power Supply Units (PSUs)
- Installation Warnings and Prerequisites
- Installation Instructions (Power Supply)
- Commissioning the Camera with Heater Option Fitted
- Simultaneous IP and Analog Video/Control ("Hybrid" Operation)
- Fit the Sunshield (MIC612)
- Getting Started
- Controlling the Camera
- On-Screen Display (OSD) Menus (Bosch Protocol)
- On-Screen Display (OSD) Menus (Pelco Protocol)
- Operation of the Thermal Camera
- Common User Commands
- Advanced Features
- Maintenance and Troubleshooting
- Technical data
- Appendices
- Back Page
PTZ Setup Menu
The PTZ Setup Menu contains pan/tilt/zoom settings that can be changed/customized.
PTZ Setup
Exit...
* Autopan: 30 deg/sec
* Tour 1 Period: 5 sec
* Tour 2 Period: 5 sec
* PTZ Fixed Speed: 4
* Inactivity: OFF
* Inact. Period: 2 min
* Autopivot: ON
* Orientation NORMAL
* Freeze Frame on
Preposition
ON
Tilt Up Limit...
Azimuth Zero...
Restore Defaults...
* = Factory Setting
Focus/Iris: Select
AutoPan
Adjusts speed of camera during AutoPan and AutoScan. Sliding scale: –(1º/sec. to 60º/sec.)+.
Default setting: 30°/sec.
Tour 1 Period
Changes dwell time between presets during the tour. Sliding scale: –(3 sec. to 10 min.)+.
Default setting: 5 sec.
Tour 2 Period
Changes dwell time between presets during the tour. Sliding scale: –(3 sec. to 10 min.)+.
Default setting: 5 sec.
PTZ Fixed Speed
Sets pan and tilt speed when controlled by a fixed speed controller. Sliding scale: –(1 to 15)+.
Default setting: 4.
9.4
50 en | On-Screen Display (OSD) Menus (Bosch Protocol) MIC612 Thermal Camera
2016.03 | 2.2 | F.01U.249.416 Operation Manual Bosch Security Systems