Operation Manual

Setup Menu Choices:
Menu Description
Exit Exits the menu.
Command Lock Allows or prohibits accessing locked commands. (If password is
set, you are prompted to enter the password. The default setting is
ON.
Bosch Menu Accesses the full configuration menu and all camera settings.
Camera Setup Accesses adjustable camera settings such as White Balance and
Night Mode.
PTZ Setup Accesses adjustable pan/tilt/zoom (PTZ) settings such as tours,
scan speed, edit presets, limit stops, recording, and AutoPivot
settings.
Edit Password Changes the password.
FastAddress Sets or changes a camera address.
Advanced
Software Version Displays the current software versions.
Ack and Reset Alarms Acknowledges and resets active alarms.
Restore All Settings Restores all settings to their original default setting.
Reset All Memory Clears all settings, including scene shots, tours, and recordings
stored in the camera memory.
Notice!
If commands are locked and you press Focus or Iris, the camera displays the on-screen
message: “Command is Locked.”
MIC612 Thermal Camera On-Screen Display (OSD) Menus (Pelco Protocol) | en 67
Bosch Security Systems Operation Manual 2016.03 | 2.2 | F.01U.249.416