Operation Manual
Table Of Contents
- Title Page
- Table of Contents
- Safety
- Unpacking
- Product Description
- Electrical Connections
- Install the MIC (standard) PSU
- MIC PSU Overview
- About the MIC Shielded Composite Cable
- Composite Cable Color-coding
- Earth Link on PCB
- Fuse Ratings
- Alarm Inputs
- Layout of MIC Power Supply Units (PSUs)
- Installation Warnings and Prerequisites
- Installation Instructions (Power Supply)
- Commissioning the Camera with Heater Option Fitted
- Simultaneous IP and Analog Video/Control ("Hybrid" Operation)
- Fit the Sunshield (MIC612)
- Getting Started
- Controlling the Camera
- On-Screen Display (OSD) Menus (Bosch Protocol)
- On-Screen Display (OSD) Menus (Pelco Protocol)
- Operation of the Thermal Camera
- Common User Commands
- Advanced Features
- Maintenance and Troubleshooting
- Technical data
- Appendices
- Back Page
Camera Setup
The Pelco Camera Setup Menu provides access to camera settings.
Camera Setup
Exit...
* White Bal: OUTDOOR
* Night Mode: AUTO
* Wiper CONTINUOUS
* = Factory Setting
Focus / Iris: Select
Camera Setup Menu Choices:
Menu
Description Sub-menu / Description Default
Setting
Exit Exits the menu.�
White
Balance
Sets a default value in
case the Pelco
controller disables the
white balance.
OUTDOOR: Sets a default setting if
the controller disables white
balance.
INDOOR: Sets a default setting if
the controller disables white
balance.
OUTDOOR
Night Mode Switches from color to
monochrome.
ON: Sets Night Mode on.
OFF: Sets Night Mode off.
AUTO: Sets Night Mode to Auto set.
ON (Day/Night
models only)
Wiper ON/OFF: Activates/deactivates the
selected wiper mode, respectively.
CONTINUOUS: Wiper wipes
continuously until deactivated
manually or by the five-minute time-
out built in to the system.
INTERMITTENT: Wipes twice, then
turns off after 15 seconds.
ONE SHOT: Wipes five times, then
turns off.
WASH WIPE: Wiper washes and
wipes.
Continuous
10.2
MIC612 Thermal Camera On-Screen Display (OSD) Menus (Pelco Protocol) | en 69
Bosch Security Systems Operation Manual 2016.03 | 2.2 | F.01U.249.416