Operation Manual

PTZ Setup Menu Choices:
Menu Description Sub-menu / Description Default
Setting
Exit Exits the menu.
Edit Tour 1 Accesses the Add /
Remove Scenes On
Standard Tour 1 Menu.
Exit: Exits the menu.
Scene (1 - 5): Adds or removes
scenes from the Standard Tour.
Edit Tour 2 Accesses the Edit Custom
Tour Menu.
Exit: Exits the menu.
Scene (1 - 5): Adds or removes
scenes from the Custom Tour.
Tour 1 Period Changes the length of
waiting time between
presets.
Sliding scale: – (3 sec. to 10 min.) + 5 sec.
Tour 2 Period Changes the length of
waiting time between
presets.
Sliding scale: – (3 sec. to 10 min.) + 5 sec.
Scan Speed Changes the Autopan and
AutoScan speeds.
Sliding scale: – (1°/sec to 60°/sec)
+
30°/
sec.
Edit Presets Modifies preset scenes. 1-99 scenes
Limit Stops Toggles the Limit Stops for
AutoScan.
ON or OFF OFF
Recordings Selects record Pattern 1 or
2, if normal pattern
command does not
respond.
“A” or “B” “A”
AutoPivot Follows a subject while
beneath the camera,
without inverting the
picture.
ON or OFF ON
MIC612 Thermal Camera
On-Screen Display (OSD) Menus (Pelco Protocol) | en 71
Bosch Security Systems Operation Manual 2016.03 | 2.2 | F.01U.249.416