Operation Manual
Table Of Contents
- Title Page
- Table of Contents
- Safety
- Unpacking
- Product Description
- Electrical Connections
- Install the MIC (standard) PSU
- MIC PSU Overview
- About the MIC Shielded Composite Cable
- Composite Cable Color-coding
- Earth Link on PCB
- Fuse Ratings
- Alarm Inputs
- Layout of MIC Power Supply Units (PSUs)
- Installation Warnings and Prerequisites
- Installation Instructions (Power Supply)
- Commissioning the Camera with Heater Option Fitted
- Simultaneous IP and Analog Video/Control ("Hybrid" Operation)
- Fit the Sunshield (MIC612)
- Getting Started
- Controlling the Camera
- On-Screen Display (OSD) Menus (Bosch Protocol)
- On-Screen Display (OSD) Menus (Pelco Protocol)
- Operation of the Thermal Camera
- Common User Commands
- Advanced Features
- Maintenance and Troubleshooting
- Technical data
- Appendices
- Back Page
Other Menus
Menu Description Default
Setting
Edit Password Sets or displays the password. See Setting Passwords,
page 37.
FastAddress Sets or changes the address. Not Set
Software Version Displays the camera software version.
Ack and Reset Alarms Acknowledges and resets alarms. If there is no active
alarm input, the OSD displays the following message:
“No Active Alarms.”
Restore All Settings Restores all settings to their original factory default
settings.
Reset All Memory Restores all settings to their original factory default
settings and clears all user programmed settings such
as preset scenes and recordings.
10.5
MIC612 Thermal Camera On-Screen Display (OSD) Menus (Pelco Protocol) | en 73
Bosch Security Systems Operation Manual 2016.03 | 2.2 | F.01U.249.416