Operation Manual
Table Of Contents
- Title Page
- Table of Contents
- Safety
- Unpacking
- Product Description
- Electrical Connections
- Install the MIC (standard) PSU
- MIC PSU Overview
- About the MIC Shielded Composite Cable
- Composite Cable Color-coding
- Earth Link on PCB
- Fuse Ratings
- Alarm Inputs
- Layout of MIC Power Supply Units (PSUs)
- Installation Warnings and Prerequisites
- Installation Instructions (Power Supply)
- Commissioning the Camera with Heater Option Fitted
- Simultaneous IP and Analog Video/Control ("Hybrid" Operation)
- Fit the Sunshield (MIC612)
- Getting Started
- Controlling the Camera
- On-Screen Display (OSD) Menus (Bosch Protocol)
- On-Screen Display (OSD) Menus (Pelco Protocol)
- Operation of the Thermal Camera
- Common User Commands
- Advanced Features
- Maintenance and Troubleshooting
- Technical data
- Appendices
- Back Page
Appendices
Keyboard Commands (Bosch Protocol) By Number
Commands, Optical Camera
Locked Functio
n Key
Command
No.
Command Description
On/Off 1 Scan 360° / Auto Pan (Continuous) Activates/deactivates Autopan without
limits.
On/Off 2 Autopan (within Limits) Activates/deactivates Autopan between
limits.
* On/Off 3 Iris Control Enters the menu (auto, manual) for iris
control.
* On/Off 4 Focus Control Enters the menu (spot, auto, manual) for
focus control.
On/Off 7 Play Custom Pre-position Tour Activates/Deactivates the playback of a
custom, pre-position tour.
On/Off 8 Play Pre-position Tour Activates/Deactivates the playback of a
pre-position tour.
* On/Off 9 Inactivity Mode Enters the inactivity menu (Off, Return to
Scene 1, Recall Previous PTZ Command).
* On/Off 11 Auto Iris Level Adjust Enters the Iris Level Adjustment menu.
On/Off 14 Set Autopan and Scan Speed Enters the speed adjustment slide bar.
On/Off 15 Set Pre-position Tour Period
(dwell)
Enters the dwell adjustment slide bar.
* On/Off 18 AutoPivot Enable Enables/disables AutoPivot.
On/Off 20 Backlight Comp Turns Backlight Compensation on or off.
* On/Off 23 Electronic Shutter Enters the Shutter Speed slide bar.
On/Off 24 Stabilization Turns Electronic Stabilization on or off.
On/Off 26 Wide Dynamic Range Activates/deactivates Wide Dynamic Range.
On/Off 30 White Balance Enters the White Balance menu.
* On/Off 35 Fixed White Balance Enters the White Balance menu.
* On 40 Restore Camera Settings Restores all settings to their original
defaults.
* On/Off 43 Auto Gain Control Switches AGC modes (On, Auto, Off).
* On/Off 44 Aperturn Correction (Sharpness) Enters the Sharpness menu.
* On 46 Advanced Menu Enters the Main Setup menu.
On 47 View Factory Settings Displays all menu default settings.
16
16.1
16.1.1
86 en | Appendices MIC612 Thermal Camera
2016.03 | 2.2 | F.01U.249.416 Operation Manual Bosch Security Systems