Operation Manual
Table Of Contents
- Title Page
- Table of Contents
- Safety
- Unpacking
- Product Description
- Electrical Connections
- Install the MIC (standard) PSU
- MIC PSU Overview
- About the MIC Shielded Composite Cable
- Composite Cable Color-coding
- Earth Link on PCB
- Fuse Ratings
- Alarm Inputs
- Layout of MIC Power Supply Units (PSUs)
- Installation Warnings and Prerequisites
- Installation Instructions (Power Supply)
- Commissioning the Camera with Heater Option Fitted
- Simultaneous IP and Analog Video/Control ("Hybrid" Operation)
- Fit the Sunshield (MIC612)
- Getting Started
- Controlling the Camera
- On-Screen Display (OSD) Menus (Bosch Protocol)
- On-Screen Display (OSD) Menus (Pelco Protocol)
- Operation of the Thermal Camera
- Common User Commands
- Advanced Features
- Maintenance and Troubleshooting
- Technical data
- Appendices
- Back Page
Locked Functio
n Key
Command
No.
Command Description
On/Off 81 Alarm Output 1
Open Collector
On–Activates output.
Off–Deactivates output.
On/Off 82 Alarm Output 2
Open Collector
On–Activates output.
Off–Deactivates output.
On/Off 83 Alarm Output 3
Open Collector
On–Activates output.
Off–Deactivates output.
On/Off 84 Alarm Relay On–Activates alarm relay.
Off–Deactivates alarm relay.
* On/Off 86 Sector Blanking / Masking Enters / Exits the Sector Blanking menu.
* On/Off 87 Privacy Masking Enters / Exits the Privacy Masking menu.
On/Off 89 Preposition Overwrite Confirmation
(toggle)
On–Isues a message that prompts for
approval to overwrite a preposition.
Off–No confirmation message issued.
On/Off 90 Command Lock/Unlock On–Lock on
Off–Lock off
* On/Off 91 Zoom Polarity On–Reverse
Off–Normal
* On/Off 92 Focus Polarity On–Reverse
Off–Normal
* On/Off 93 Iris Polarity On–Reverse
Off–Normal
* On/Off 94 Set Azimuth Zero Point /
Recalibrate Azimuth Compass
Sets the zero degree pan position.
Refer to Azimuth, Elevation, and Compass
Directions, page 80.
On/Off 95 Display Azimuth/Elevation Readings On–Displays azimuth/elevation readings.
Off–Hides azimuth/elevation readings.
Refer to Azimuth, Elevation, and Compass
Directions, page 80.
On/Off 96 Display Compass (Point) Readings On–Displays compass heading.
Off–Hides compass heading.
Refer to Azimuth, Elevation, and Compass
Directions, page 80.
On/Off 97 Video channel (toggle) On - Switches view to thermal camera.
Off - Switches view to optical camera.
On 99 Factory P/T Home Position Recalibrates home position; can be used as
an Alarm Output.
On/Off 100 Record A Activates/deactivates recording A.
On/Off 101 Record B Activates/deactivates recording B.
88 en | Appendices MIC612 Thermal Camera
2016.03 | 2.2 | F.01U.249.416 Operation Manual Bosch Security Systems