Operation Manual

Locked Functio
n Key
Command
No.
Command Description
On/Off 102 Wiper continuous Turns on/off continous wiper mode.
On/Off 103 Wiper intermittent Activates the wiper in Intermittent mode
(the wiper wipes twice, then turns off after
15 seconds).
On/Off 104 Wiper one shot Activates (One shot) to wipe five times,
then turn off.
On/Off 105 Wash/Wipe Activates wash/wip mode. Cameras moves
to designated washer preset (62), wiper
starts automatically.
On 997 FastAddress, display Display the current FastAddress of the
camera.
On 998 FastAddress, all units Displays the current FastAddress of the
camera and programs all units.
On 999 FastAddress, unaddressed cameras Displays and programs unaddressed MIC
units.
Set “1-99” Pre-position Programming Set ##–Programs a preset view.
Shot “1-99” Pre-position Recall Shot ##–Recall programmed preset.
Set 100 Pre-position Menu Enters the Pre-position menu.
Set/
Shot
101 Autopan Left Limit Set–Programs left limit.
Shot–Shows limit.
Set/
Shot
102 Autopan Right Limit Set–Programs right limit.
Shot–Shows limit.
Set 110 Factory P/T Home Position Set–Recalibrate home position.
* Set 802 Edit Password Enters the Edit Password menu.
* Set 899 Reset ALL Restores all settings to original defaults
and clears all user-programmed settings.
Set 900 Edit Tour 1 (Standard) Enters the Standard Tour Scene menu.
Shot 900 Edit Tour 2 (Custom) Enters the Custom Tour Scene menu.
Set/
Shot
901-999 Adds/Removes a Preposition Shot
from Tour 1
Set ###–Adds preset.
Shot ###–Removes preset.
Commands, Thermal Camera
Locked Functio
n Key
Command
No.
Command Description
On/Off 1 Scan 360° Autopan without limits.
On/Off 2 Autopan Autopan between limits.
16.1.2
MIC612 Thermal Camera Appendices | en 89
Bosch Security Systems Operation Manual 2016.03 | 2.2 | F.01U.249.416