Installation Guide

4
Electrical Supply Cable - Minimum #14 AWG, 2 conductor, 1
ground, insulated copper conductors rated 75°C or higher
Hot Water Supply Line - Minimum
3
/8″ O.D. copper tubing or metal
braided dishwasher supply line
Shut-off valve and ttings appropriate for hot water supply line
(copper tubing/compression tting, or braided hose)
UL listed conduit connector or strain relief is required if you attach
the eld wiring directly to the terminal block
Hammer Hole Saw
Pipe Wrench
Tape Measure
Slot Screwdriver
Phillips Screwdriver
Torx T-20 Screwdriver
Wire Cutter
Wire Stripper
Ø 2 mm (
1
/16 in) Drill
Level
Adjustable Wrench
Tools and Materials Needed
4