Full Product Manual

Page 9
REF. NO. DECSRIPTION QTY.
1
Beam assembly
1
2
Side mounting bracket (L &R)
2
3
Hardware mounted on the beam, including:
3-1
Hex head bolt / M12 x 35
4
3-2
Flat washer / M12
4
3-3
Lock nut / M12
4
4
Hardware kit # 21,including:
4-1
Hex head bolt / M10 x 35
6
4-2
Flat washer / M10
12
4-3
Lock nut / M10
6
STEP 2: Install the Frame Axle.
1. Position the Frame Axel with its mounting ears outside of the bottom of both Side Mounting Brackets,
and secure the Axel with M10 hardware in the hardware kit # 22 attached then, then tighten using a 16mm wrench
on the bolts, and a 17mm wrench on the lock nuts. See FIGURE 5.
REF. NO. DECSRIPTION QTY.
5
Frame Axle
1
6
Hardware kit #22, including:
6-1
Hex head bolt / M10 x 35
4
6-2
Flat washer / M10
8
6-3
Lock nut / M10
4
(FIGURE 5)
Page 12