Full Product Manual

Page 11
STEP 5: Attach the log splitter to the Tractor. See FIGURE 7.
1. Position the splitter behind the three point hitch arms, and adjust the Lower Draft Arms to the Splitter Hookup Pins at
both ends of the Axle.
2. Slide the Lower Draft Arms onto the Splitter Hookup Pins, and secure with the Spring Clips.
3. Position the Upper Draft Arm inside the End Plate bracket; slide the Tractor Hitch Pin through the holes of the
bracket and Upper Draft Arms as shown, and then secure with the Spring Clip.
4. Lift the log splitter off the ground using the Tractor 3-Point Hitch.
(FIGURE 7)
Page 14
Upper Draft Arm
Lower Draft Arm
Hitch
Pin
Lower Draft Arm
Splitter
Hookup Pin
Spring
Clip