Full Product Manual

Page 14
The control handle has three positions. See FIGURE 10.
• FORWARD — To split wood in Forward direction. Move the control handle to the FORWARD position to move wedge
forward to split the log.
• NEUTRAL — To stop wedge. The control handle will return to the NEUTRAL position as soon as the handle is released,
and the wedge stops moving at any point during splitting.
• REVERSE — To split another wood in Reverse direction. Move the control handle to the REVERSE position to move the
wedge backward to split another log.
NOTE: The control handle will return to the NEUTRAL position as soon as the handle is released, and the wedge stops
moving backward..
WARNING! If the control handle on your log splitter is not functioning properly, STOP USE IMMEDIATELY
and contact an authorized service dealer.
WARNING! Do not attempt to service, repair or replace control valve. Contact an authorized service dealer.
WARNING! Do not attempt to adjust or modify the control valve or the hydraulic system from its original
settings or manufacturer in any way.
USING CONTROL HANDLE
OPERATION INSTRUCTIONS
(FIGURE10)
Neutral
Reverse
Forward
Page 17