Full Product Manual

• Lubricate the wedge and upper side of the machine

body.

This will allow the log to move smoothly on

the surface. See FIGURE 6

• Wear non-slip safety shoes, safety goggles, safety

gloves, protective hair covering and suitable work

clothing. Never wear jewelry, necktie and other

loose clothing.

• Logs should be cut with square ends. Never split logs

larger than 10 in. diameter or 20-1/2 in. long. Uneven

logs (e.g. knotted, curved, etc.) should not be used.

• Before every operation, LOOSEN the vent plug to allow

air in and out. Failure to do so may blow the seals which

could cause permanent damage to the log splitter and

void warranty.

NOTES:

1. ALWAYS read the operator’s manual before operation.

2. NEVER allow children to operate this log splitter. NEVER allow adults lacking proper instructions and understanding to

operate this log splitter.

3. NEVER operate the log splitter when tired or under the influence of alcohol, drugs or medication.

4. Always use eye protection which is marked to comply with ANSI Z87.1.

5. NEVER use this log splitter for any purpose other than splitting wood. It is designed for this use only. Any other use can

cause serious injury or death.

6. Check that the switch, power cable and plug are not damaged (no cracks, etc.) to prevent the risk of electric shock or a

short circuit.

7. Check that all nuts, bolts and hydraulic fittings are tight to be sure the equipment is in a safe working condition.

8. Ensure that the horizontal distance between the splitter and outlet is more than 5 feet.

9. Be familiar with all controls and proper operation. Know how to stop the machine quickly in the event of any malfunction

or emergency.

(FIGURE 6)