Replacement Part List

1. DO NOT discard packing materials until you have carefully inspected and satisfactorily operated the tool.
2. Read, understand, and follow all instructions on the machine and in this manual and the engine manual before
attempting to assemble and operate. Keep the manuals in a safe place for future and regular reference and for ordering
replacement parts.
3. Lubricate the wedge and upper side of the machine body for splitting smoothly.
See FIGURE 1
4. Check the hydraulic oil level, engine oil level and fuel before every operation.
5. Sharpen the wedge periodically.
6. DO NOT continue to push on the control handle more than 3 seconds if the wedge can’t cut through an oversized
or extremely hard log. Force the tool will cause permanent damage and void warranty.
7. Try to split from another end or cut a small piece from the border instead of the center when you fail to cut through
an oversized log.
8. Move the control handle to Forward or Backward position gently to operate. Push or pull hard on the control handle lever
won’t help create more power, but break the handle or damage the internal valve parts and void warranty.
9. DO NOT expose this machine to rain or use in a damp environment. An optional log splitter cover is recommended.
ONLY operate the log splitter from the operator zones as shown below. The operator has the safest and most efficient
access to the control valve and the beam in this location. Failure to operate the log splitter in this position can result in
serious injury or death. See FIGURE 2 / FIGURE 3
IMPORTANT TIPS
OPERATOR ZONE
Operator Zone
Horizontal Position Vertical Position
(FIGURE 2) (FIGURE 3)
Operator Zone
4