USB 0814
INSTRUCTIONS INSTRUCTIONS Panel Introduction CONTENTS Panel Introduction Basic Function Remote Control Operation Turn on/off Access main interface Wallpaper and Logo setup Radio Operation Disc Operation USB/SD Card Operation BT Operation External input operation Compass Operation Calculator Operation Steering wheel setting GPS Operation Other Operation Basic operation setup menu Access setup interface General Settings Wiring Diagram Trouble shooting Specifications Accessory DVD Parental control function
BASIC FUNCTION INSTRUCTIONS 1. /OPEN Button Press the button to open / close the screen. Press this button for short moment to turn on power, and long press it to turn off power. 2. MODE Button When the unit is power on, Repeat press this button can switch to different function mode as following picture. Note: When the device without connecting to USB、SD or DVD no disc inside, the system will automatically skip these related working mode. 12.
Remote Control Operation INSTRUCTIONS 28 3. SOURCE Button Press this button to change mode. 4. EQ Button Press this button to choose POP、ROCK、 METAL、EQ off. 5. SEEK+ ( ) / SEEK- ( ) Button In normal playback MP3、USB、SD songs, Press this button to previous song or next song. 6. VOL+ ( ) / VOL- ( ) Press this button to increase or decrease volume level. 7. SEL Button Press this button to choose sound feature. 8. LOUD Button Press this button to startup LOUD function.
Turn on/off Radio Operation When the ignition switch is put in ACC or ON position, Press [ ] button on the front panel to turn on the unit. After the host starts, hold [ ] button for 3 seconds, the host will turn off. 1. Enter/exit Touch [Radio] icon in the main interface to enter into the radio interface. Touch [ ] icon to return to main interface, and then touch other function icons so as to exit radio mode. Access main interface 2.
Disc Operation INSTRUCTIONS 1. Play/eject disc Play disc Insert the disc into the disc slot with the printing surface up, system will detect the disc and automatically take it in to read and play. Eject disc (1) Click button on the panel to eject the disc. (2) If a disc has not been took away 15 seconds after it is ejected, system will automatically take in the disc but not play. Do not insert two discs or more. 2.
External input operation BT Operation 1. Enter/exit Touch [BT] icon in the main interface to enter the BT interface, as PIC 1: Touch icon to exit BT interface. 2. Pair/link To use BT hand-free function, make connection first, i.e. match the host with the BT mobile phone. Operation methods: Set the host to be matching state, and open the BT of your mobile phone and use the mobile phone to search device, the mobile phone shall prompt to match password with the BT when it has searched the BT device.
Basic operation setup menu GPS Operation 1. Navigation Function Operation For detailed operation of navigation function, see “Navigation Operation Manual”. 2. Receiving signal error When the satellite signals can be normally received, the error of standard GPS shall be about 7 meters. Driving on parallel sections, there shall be error even the product has auto-correct function.
WIRING DIAGRAM General Settings System setting In the General Settings screen, click [SYSTEM] icon to enter the System setting interface, as shown below: In the set interface click [GENERAL] icon, into the General set interface. (Password: 888888). General settings have been set at the factory.
INSTRUCTIONS INSTRUCTIONS SPECIFICATIONS ACCESSORY Power supply DC 12V Power range 10.8-16.0V DC Max Current Consumption 15A Ground system Negative ground Power Output 85 WattsX4 Channels FM tuner US frequency range 87.5-107.9MHz European frequency range 87.