Installation Guide

3
“NAVARRA”WALL-MOUNT WINE STORAGE
Assembly Instructions
NOTE: NO DRILLED HOLE OR PLASTIC ANCHOR
REQUIRED WHEN MOUNTING TO WOOD WALL.USE
SCREW ONLY. WE DO NOT SUPPLY HARDWARE FOR
MOUNTING ON CONCRETE WALLS.
Step 1: Drill two 1/4" holes
on wall .
One screw must be attached
directly into a wall stud. Wall
anchor is not needed when
mounting to wall stud.
Insert plastic anchors ( A )
into the holes of wall as
shown.
(When doing this, you will
need a hammer help you).
Using the phillips head
screwdriver, install screw (B)
into each of the anchors (A).
Turn the screw (B ) in until
there is a gap of 3mm
between the head of the
screw and the wall as shown.
Install the unit onto the
screw (B) and secure the
bracket is resting securely
on the mounting screw (B) .
"the holes measurement on wall must match
with the holes measurement on back of the unit"