Installation Guide

Page | 3
HZ675300TX
Kenton One Drawer/Three Basket Storage
Assembly Instructions
ANTI- TIPPING
HARDWARE MUST BE
USED FOR THIS
PRODUCT TO AVOID
TIPPING AND INJURY
Step 1:
Attach Bracket (1) to top of
Cabinet (A).
Drill two holes on wall
using a 3/16ths drill bit at
same height as Bracket
on Cabinet.
Insert Wall Anchors (3) to
wall and gently tap them
in using a hammer. Then,
attach Bracket (1) to wall
using Flat Screws (4) as
shown.
Step 2:
Attach Plastic Strap (2) to
Brackets (1) on the wall
and Cabinet (A) as
shown.
WALL
WALL