Installation Guide

5 |
English
Note! Installation by a certified electrician is recommended.
• Find your main fuse or breaker box in your
home.
• Turn off and/or unscrew all fuses.
• Turn off all circuit breaker switches that
control power to the room in which you
are working.
• Turn any wall switches off. If any pull chains
or switches are on the fixture, turn off.
Note! Do not damage any wire insulation during installation.
Note! Ensure no rough or sharp edges are in contact with any
wires.
Mounting Instructions:
1. Confirm power is off.
2. Thread screws (C) into the mounting strap (E).
3. Attach the mounting strap (E) to an electrical box
with screws (C).
Make the wire connections:
1. Confirm power is off.
2. Connect the electrical box black wire to the black fixture wire.
3. Connect the electrical box white wire to the white fixture wire.
4. Attach green/yellow grounding wire to the
mounting strap with grounding screw (D).
Attach the lamp:
1. Align the holes on the side of the canopy (B) with the 2 screws of the
mounting strap (E).
2. Secure the canopy (B) to the mounting strap (E) with screws (A).