Owner`s manual

12
Other Control Settings
Display Information
When you adjust the controls or settings of the Duo-i the display shows information and symbols related to what you are
doing. After a few seconds the display goes back to showing the time or the source you are listening to. You can select which
of the default displays you want.
Using the Front Panel Controls
1
Turn the MODE control to highlight the Info icon of the
display.
2
Turn the MODE control to select the Source display or the
Time display. Press the MODE control to set the default
display.
Using the Remote Control
Press the INFO button to switch between Source or Time display.
If the display default was set to show the Time the icon for the
currently selected source ashes a few times. The display now
defaults to show the Source.
If the display default was set to show the Source the clock icon ashes a few times. The display now defaults to show the
Time. Note that the icon for the current source displays in addition to the time.
In the example shown above the default display is set to Time and the source is FM1.
Display Brightness
The display brightness varies automatically with changing light conditions. In addition the overall range of the display
brightness can be adjusted to suit personal preference.
1
Turn the MODE control to highlight the Brightness icon.
2
Press the MODE control. The Brightness icon and the current brightness setting will
ash.
3
Turn the MODE control to adjust the brightness setting. The setting can range from
1 – 20.
4
Press the MODE control again to set the new display brightness setting. The brackets
around the Brightness icon ash a few times. Then the display reverts to its previous
state.
In this example the brightness is set to 12.


 
 