Owner`s manual

8
Setting a Station Preset
1
Use the MODE control, or press the AM or FM button on
the remote control to select the radio band you want to
use. There are two sets of FM presets. They are selected by
choosing the FM 1 or FM 2 sources.
2
Use the front panel TUNE control, or the
[
or
]
buttons
on the remote control to tune in the station you want to
assign to a preset.
3
Press and hold the front panel or remote control PRESET
BUTTON (1-5) you want to set up. A tone will sound and the
preset number will light indicating the station has been
assigned to the preset.
In this example FM station 107.9 has been assigned to preset 3 in the
FM 2 group.
Selecting a Preset Station
1
Turn the MODE control to highlight the radio band of the
preset you want to select. There are two sets of FM presets.
They are selected by choosing the FM 1 or FM 2 source.
2
Press and quickly release the PRESET BUTTON (1-5) you want
to select. The preset indicator, the preset number and the
station frequency will light.
In this example AM preset 5, with station frequency 1050 assigned
to it, has been selected.
Note: Pressing a PRESET BUTTON more than once will switch to
the other radio band or preset group. Using this example, if you
press PRESET BUTTON 5 again, then preset 5 in the FM 1 group is
selected. Another press selects preset 5 in the FM 2 group. Press
the button one more time and AM preset 5 is selected again.
Adjusting Bass and Treble
1
Turn the MODE control to select the Bass or
Treble icon in the display. The Bass or Treble
icon and the current setting ashes in the
display.
2
Turn the MODE control clockwise to increase,
or counter-clockwise to decrease the Bass or
Treble
In these examples the Bass is set to –2 and the Treble is
set to +1.









 


   