Specifications

BALANCE
To change the level balance, press the BALANCE pushbutton. “BAL
CENTERED” will show in the right display. Now rotating the center
control will change the balance instead of the volume for as long as
“BAL...” is displayed.
Turning the control counterclockwise (left) will cause an indication
such as “BAL R -1.8dB” in the right display. This means that the right
channel has been attenuated -1.8 dB below the left channel, regardless of
volume setting, making the left channel louder.
The range of balance offset is limited to -20.0 dB. If the control is
then rotated further counterclockwise, the “BAL R MUTED” will be
displayed to indicate that only the left channel is on.
After several seconds of not changing the balance, the right display
will return to the “VOL...” indication. You may also return to controlling
volume by again pressing the BALANCE pushbutton. The balance
resolution will be the same as programmed for the volume control.
WARNING: If the input is programmed to be in “THEATER MODE,”
then the balance control will have no effect.
OPERATION
2-4