Specifications

REMOTE CONTROL
EXPANSION
The remote control for your Boulder 2010 Preamplifier is in three
sections–the transmitter, the 2010 module and the battery pack. These
sections are held together by long screws inserted into the top of the
transmitter and running through all sections.
Additional longer screws are provided for adding sections from
other Boulder series 2000 products to make one convenient control. A
special screwdriver designed to fit the end of the screws is provided. The
modules may be assembled in any order desired.
When removing sections, it is important to use the screws to maintain
connector alignment. DO NOT PULL THE SCREWS OUT FIRST.
To separate sections, loosen the screws while slowly pulling the
battery pack from the 2010 module. Slide the battery pack off the screws.
Then slide the module off the screws. Once all sections are removed from
the transmitter, you may remove the screws from the transmitter.
REMOTE
CONTROL
3-1