Specifications

3-7
SOURCE SELECTION
To select an input (source) press the button marked SRC on the
preamp module. While “NUMBER?” is showing in the left display,
press the desired input number (1 through 6) on the transmitter module.
You will now be listening to your desired source, and it will be showing
in the left display. Entering a 0 will cause no input to be selected, and
“SOURCE NONE” will show in the left display.
Entering 7, 8, or 9 will allow you to select a record source. Once
you are in the record selection mode, you may select a record source by
pressing the SRC pushbutton, followed by pressing the desired input
number (1 through 6).
If SRC is inadvertently pushed, and no change is desired, pressing
the SRC button again will maintain the previously selected source.
REMOTE
CONTROL