Specifications

PROGRAMMING
While it is not necessary to ever use any optional programming
functions, you will probably find them helpful in using your Boulder
2010 Preamplifier.
All programming is accomplished by pressing the PROGRAM
pushbutton which causes “PROGRAM MODE” to be displayed in the
left display and “SELECT?” in the right display.
This is the starting point for all of the following programming
options. You may leave program mode whenever “PROGRAM MODE”
is showing in the left display by again pressing the PROGRAM
pushbutton.
INPUTS
Each input has several features associated with it. These include
assigning an alphanumeric name of your choosing, setting an individual
offset attenuation, correcting polarity, balance offset, theater mode, and
setting recordability.
From “PROGRAM MODE” press the input source number you wish
to program from ONE through SIX.
If you selected ONE, then “1.NAME?” will show in the left display
and “NO” will show in the right display. Rotating the center control will
PROGRAMMING
4-1