Specifications

“1. MODE?” will now show in the left display and “NORMAL”
will show in the right display. Rotating the center control will change
the mode to “!THEATER!.” Theater mode sets the gain of the 2010 to
unity and the balance to centered, allowing easy integration of the 2010
into a surround sound system. This mode is designed to be used with
a surround sound processor, during which time only the processor’s
volume control is active.
WARNING: Use this mode with extreme caution as the 2010 volume
control will be disabled for this input once you exit the programming
mode.
NOTE: Input level, input balance, and output balance offset are still
in effect in theater mode.
“1.RECORDABLE” will show in the left display and “YES” will
show in the right display. Use of this program feature will be described
in the “Recording” section.
Press the same input source number to return to the program mode
starting point.
4-4
PROGRAMMING