Specifications

4-13
If you make a mistake repeatedly press the SRC button until all ten
characters are passed by and then continue until the other settings are
passed through and the name assignment display reappears.
After the tenth character is assigned, “1.LEVEL?” will show in the
left display and “0.0dB” will show in the right display. Press the UP
and DOWN buttons to change the display and the main output’s level
offset simultaneously. After the desired level is reached, or if no change
is desired, press the SRC button again.
”1. BALANCE?” will show in the left display and the amount of
balance offset will show in the right display. Pressing the LEFT and
RIGHT buttons will change the amount of balance offset, or if no change
is desired, press the SRC button.
“1.POLARITY?” will show in the left display and “PIN 2 HIGH”
will show in the right display. Pressing the UP button to display “PIN
3 HIGH” and the DOWN button to display ”PIN 2 HIGH”, the polarity
relays will immediately activate. After the desired polarity is selected
with the UP and DOWN buttons, or if no change is desired, press the
SRC button.
PROGRAMMING