Specifications

6-2
RECORD SOURCE SELECTION
Any one of the 6 inputs may be routed to the record outputs. Select
an input by pressing the RECORD pushbutton on the front panel, and
then one of the pushbuttons labeled ONE through SIX. The respective
input will be displayed in the left display. For example, if input one is
chosen, “R1 INPUT 1” will show in the left display.
While “R...” is showing in the left display, holding down any of the
pushbuttons labeled ONE through SIX for several seconds will cause
no input to be selected, and “RECORD NONE” will show in the left
display.
To return to the listening input selection, press the RECORD
pushbutton. The left display will show the main input previously chosen
for listening.
If the input selected has not been programmed for recording, “R...
REC ERROR” will show in the left display and the record output will be
connected to the last source. See the following section.
If you have programmed the record outputs to follow the main
outputs and you press the RECORD pushbutton, the left display will
show “REC = MAIN.”
RECORDING