Specifications

PLACEMENT OF THE 2010 PREAMPLIFIER
Your Boulder 2010 Preamplifier is designed to reduce the effects that
external magnetic and radio fields (RF) have on its internal circuitry.
While placement is not critical, known magnetic fields should be
avoided. Line of sight from the listening position is necessary for the
remote control to function properly.
Because the preamplifier and its power supply are heavy, a solid,
stable surface should be used. As both will generate some heat, they
should be allowed to have good air circulation around them. In particular,
make certain that the fins on the rear of the supply are not blocked.
You may want to have some access to the rear panels for cable
changes.
GETTING
STARTED
1-2