User guide

4:9.2 Burner Pump for Single Pipe System
The burner is supplied set for single pipe operation. The return port is plugged and the Bypass Screw is not
fitted. See Fig. 4:9b.
BOULTER BUDERUS CAMRAY 5
PAGE 17
4:10 CONTROL PANEL
The Control Panel is pre-wired and fitted to the Boiler ready for connection to the system wiring.
4:10.1 Connecting Control Panel
If a Boulter Programmer is to be fitted refer to section 4:11 of this manual for fitting instructions before
connecting mains.
1. Connect the mains electrical supply to the 3 pin Mains Plug. See Fig. 4:10a.
Pa
g
e 25 of 67
14/04/2005file://D:\PL47000\PL47000.htm