User guide

4:11.8 PROGRAMMING PROCEDURE
To create a programme the same method is used as for setting the Clock.
With the Timer/Programmer in the operating mode and the Display showing the correct Time and Day. (Refer
to section 4:11.4)
Display >
Press twice
Display >
Press to answer
Display >
Press to change ON1 in sequence or -
Press to continue through sequence
Display > (after )
Use and to change time by 10 min intervals.
Press - time is now set.
Continue through sequence pressing to change setting and to continue.
On completion Press three times to return to operating mode.
4:11.9 TEST
The Test facility is a unique feature of the Boulter Programmer. Test enables a quick review of the 7 day
programme.
TO USE ‘TEST’ With the Timer/Programmer in the operating mode and the Display showing the correct Time
and Day.
8. OFF1 - HW OFF 20. OFF1 - HW OFF
9. ON2 - HW ON 21. ON2 - HW ON
10. OFF2 - HW OFF 22. OFF2 - HW OFF
11. ON3 - HW ON 23. ON3 - HW ON
12. OFF3 - HW OFF 24. OFF3 - HW OFF
Pa
g
e 32 of 67
14/04/2005file://D:\PL47000\PL47000.htm