User guide

Press three times.
Display >
Press - then press and hold and the display will ‘run’ and pause for 2-3 seconds on the first ON time
of the day you are at. The On indicator lights will illuminate and heating/hot water circuits will be energised.
Releasing the YES button will stop the display running.
Continue pressing button to run through the 7 days of the programme pausing at each switching time.
Press twice to cancel Test and return to operating mode.
4:11.10 HOLIDAY
The Holiday Setting is a unique feature of the Boulter Programmer. This enables a period of days to be set
(up to 99) during which time the Heating System is OFF. When the Holiday Period is over the Programmer
reverts back to the normal programme. Each count through mid-night = 1 day.
TO SET ‘HOLIDAY MODE’ With the Timer/Programmer in operating mode and the Display showing the
correct Time and Day
Press four times and once.
Display >
Use and to set number of holiday days.
Press once
Display >
The Programmer is now in ‘Holiday Mode’ for the period set.
Have a Good Holiday!
To cancel ‘Holiday Mode’ press any button.
BOULTER BUDERUS CAMRAY 5
PAGE 21
4:12 PANEL WIRING DIAGRAM
IMPORTANT ENSURE GOOD EARTH
Pa
g
e 33 of 67
14/04/2005file://D:\PL47000\PL47000.htm