User guide

BOULTER BUDERUS CAMRAY 5
PAGE 1
1:1 INTRODUCTION
Getting to Know your New Camray 5 Boiler Thank you for choosing the Camray 5 -manufactured in the UK by
Boulter Buderus who are renowned oil-firing specialists. Before using your new Boiler, we ask that you
carefully read the following information.
A
ll Camray appliances are the result of many years of research, development and experience. Whilst our
Boilers are designed with simplicity of operation in mind, there are certain features and benefits which only
become obvious when you thoroughly understand how best to use your new Camray product.
We trust that you will enjoy many years of reliable service from your new Camray Boiler and, once again,
thank you for choosing Camray.
USEFUL INFORMATION
Your installer will help you complete this where necessary.
About the Boiler*
*Information can be found on appliance data label located inside the front left hand side panel of the casing.
A
lso on the front cover of the installation manual and front panel.
About the installation
7:4 Recommended Commissioning Check List
7:5 Recommended Commissioning Tests
SECTION 8 - MAINTENANCE
8:1 Maintenance
8:2 Air Shutter Adjustment
8:3 Baffle Arrangement
SECTION 9 - SPARES & ACCESSORIES
See Spare Parts
SECTION 10 - FAULT FINDING
10:1 Fault Finding
10:2 Fault Finding Chart
Boiler Model
Serial Number
Burner Type
Fuel Type: Kerosene C2
Installer
Installation Date
Service Engineer
Pa
g
e 5 of 67
14/04/2005file://D:\PL47000\PL47000.htm