User guide

Fig. 6:5b Vertical Flue - Pitched Roof Assembly
BOULTER BUDERUS CAMRAY 5
PAGE 38
6:6 HIGH LEVEL FLUE LENGTH ALTERATION
There is a certain amount of adjustment available on the vertical height and horizontal length.
This is attained by pushing two telescopic flues together until the desired dimension is obtained. Secure any
vertical lengths by using a drill and 4 self tapping screws supplied.
BOULTER BUDERUS CAMRAY 5 PAGE 39
7:1 COMMISSIONING
Pa
g
e 54 of 67
14/04/2005file://D:\PL47000\PL47000.htm