User guide

Is the flue adequately sized for the appliance rating?

Is the flue free of any obstruction?

Has the chimney been adequately lined and insulated?

NOTE:- Lining the flue and back filling will help prevent condensate problems

BALANCED FLUE APPLIANCES

Is the correct flue kit fitted?

Is the Flue off take correctly secured to the boiler by four nuts and washers. Is the gasket provided fitted

correctly?

Has the rear Air Entry Plate been fitted with Blanking Plates where necessary?

Can leakage from flues tubes or air ducts occur? All seals fitted correctly?

Is the sampling test point (on high level or vertical kits) resealed?

VENTILATION

CONVENTIONAL FLUED BOILERS

Is the ventilation opening from the outside to the boiler room adequate?

Is there sufficient clearance for air to enter the Boiler at the rear of appliance?

Will any ventilation fans prevent adequate supply of combustion air?

Is the CF adaptor fitted correctly to the boiler with all nuts and gaskets?

Is the sampling test point resealed?

ELECTRICAL POWER SUPPLY

Is the electrical supply to the appliance appropriate?

Are the electrical input connections to the control panel correct?

Is the supply fuse correct?

Does the wiring comply with the latest IEE regulations?

e 58 of 67

14/04/2005file://D:\PL47000\PL47000.htm