Datasheet
3224W Top Adjust
5.3
(.208)
0.2
(.007)
0.7
(.028)
1.0
(.040)
0.8
(.032)
5.1
(.200)
4.8
(.190)
1.3
(.050)
2.5
(.100)
2.9
(.114)
3
1
2
3.5
(.139)
1.5
(.060)
3.9
(.155)
2.5
(.100)
2.6
(.103)
1.2
(.047)
DIA.
3 PLCS.
2.0
(.079)
0.8
(.032)
2 PLCS.
1.3
(.050)
2 PLCS.
1.6
(.061)
ADJUSTMENT SLOT
0.6
(.022)
WIDE
X
DEEP
0.5
(.020)
3224X Top Adjust
5.3
(.208)
0.2
(.007)
1.0
(.040)
5.1
(.200)
4.8
(.190)
2.5
(.100)
2.5
(.100)
5.1
(.200)
1
2
3.5
(.139)
0.8
(.032)
1.3
(.050)
5.7
(.225)
3.9
(.155)
1.2
(.047)
2 PLCS
3 PLCS.
2.0
(.079)
0.8
(.032)
2 PLCS.
TYP.
TYP.
1.3
(.050)
2 PLCS.
1.9
(.075)
ADJUSTMENT SLOT
0.6
(.022)
WIDE
X
DEEP
0.5
(.020)
3224J Side Adjust
3
1
2
2.0
(.079)
4.0
(.157)
5.0
(.195)
3.71
(.146)
0.8
(.032)
2.3
(.090)
4.8
(.190)
1.5
(.060)
2.6
(.102)
1.2
(.047)
2.4
(.095)
DIA.
4.6
(.180)
0.2
(.007)
2.3
(.090)
2.0
(.079)
1.3
(.050)
2 PLCS.
3 PLCS
0.9
(.034)
2 PLCS.
1.3
(.050)
1.0
(.039)
0.5
(.020)
1.14
(.045)
0.2
(.007)
2 PLCS.
ADJUSTMENT SLOT
0.6
(.022)
WIDE
X
DEEP
0.5
(.020)
3224G Side Adjust
5.2
(.205)
1.3
(.050)
2.3
(.090)
2.0
(.079)
1.3
(.050)
1
3
2
2.3
(.090)
4.8
(.190)
1.5
(.060)
2.7
(.108)
1.2
(.047)
2.4
(.095)
4.6
(.180)
6.0
(.236)
0.13
(.005)
3.9
(.152)
0.5
(.020)
DIA.
TYP.
3 PLCS.
2 PLCS.
ADJUSTMENT SLOT
0.6
(.022)
WIDE
X
DEEP
0.5
(.020)
203
3224
438M
J
203
3224
438M
G
203
3224
438M
X
203
3224
438M
W
0.9
(.034)
2 PLCS.
1.3
(.050)
0.5
(.020)
0.2
(.007)
Features
■ Surface Mount 4 mm Square / Multiturn
Cermet / Industrial / Sealed
■ Halogen free** with date code 114
■ Sealed to withstand board wash
processing
■ Pick and place centering design, with fl ush
adjustment
■ 4mm design meets EIA/EIAJ/IPC/VECI SMD
standard trimmer footprint
■ Low CRV - 1 %
■ RoHS compliant* - see processing
information
on RoHS compliant surface
mount trimmers
■ For trimmer applications/processing
guidelines,
click here
3224 - 4 mm SMD Trimpot
®
Trimming Potentiometer
Electrical Characteristics
Standard Resistance Range
.......................................... 10 to 2 megohm
(see standard resistance table)
Resistance Tolerance ....................±10 % std.
Absolute Minimum Resistance
..........................................1 % or 2.0 ohms
(whichever is greater)
Contact Resistance Variation
....................................1 % or 3 ohms max.
Resolution ..........................Essentially Infi nite
Insulation Resistance ........................500 vdc.
100 megohms min.
Dielectric Strength
Sea Level ....................... 600 vac (1 minute)
Adjustment Angle ..................... 12 turns nom.
Environmental Characteristics
Power Rating (300 volts max.)
85 °C .............................................0.25 watt
150 °C ................................................0 watt
Temperature Range ............-65 °C to +150 °C
Temperature Coeffi cient ............±100 ppm/°C
Humidity ................MIL-STD 202 Method 106
TRS ±2 %; IR 10 megohms
Vibration .............. 20 G TRS±1 %; VRS ±1 %
Shock ................ 100 G TRS ±1 %; VRS±1 %
Load Life .... @ 85 °C rated power 1,000 hours
TRS ..........................................3 ohms or 3 %
(whichever is greater)
Rotational Cycling ......................... 200 cycles
TRS ..........................................3 ohms or 3 %
(whichever is greater)
Thermal Shock .................................. 5 cycles
TRS±2 %; VRS±1 %
Physical Characteristics
Mechanical Stop ...........................Wiper idles
Torque ..................................... 180 g-cm max.
Weight ........................Approximately 0.01 oz.
Marking ......................... Manufacturer’s code,
resistance code and date code
Solderability ....................... Per MIL-STD-202,
Method 208
Wiper ........................50 % (Actual TR) ±10 %
Flammability .......................................UL94V0
Pushover Strength
J, G ..................................................4.4 lbs.
W, X ......................................................1 lb.
Adjustment Tool ...................................... H-91
Product Dimensions
DIMENSIONS:
MM
(INCHES)
How To Order
3224 J - 1 - 502 E
Model
Style
Standard or Modifi ed
Product Indicator
-1= IR Refl ow (standard)
†-2= Wave Solderable
-FW5= .070 ” ± .010 ” Shaft Extension
Resistance Code
Embossed Tape Designator
E = Style J, G: 500 pcs./7 ” reel (standard)
Style W: 250 pcs./7 ” reel (standard)
Style X: 200 pcs./7 ” reel (standard)
G = Style J, G: 1500 pcs./13 ” reel (standard)
Style W: 1000 pcs./13 ” reel (standard)
Style X: 850 pcs./13 ” reel (standard)
Blank = Style J, G: 1500 pcs./13 ” reel (FW5)
Style W, X: 600 pcs./13 ” reel (FW5)
Consult factory for other available options.
† -2 has a treated stainless steel shaft
*RoHS COMPLIANT
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
**Bourns follows the prevailing defi nition of “halogen free” in the industry. Bourns considers a product to be
“halogen free” if (a) the Bromine (Br ) content is 900 ppm or less; (b) the Chlorine ( Cl ) content is 900 ppm or less;
and (c) the total Bromine (Br) and Chlorine ( Cl ) content is 1500 ppm or less.
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications.